DTF transfer film in roll format 60cm x 100m

Our transfer film has been specially developed for printing with our water-based pigment inks and DTF transfer powder. Direct To Film (DTF) transfer printing is a modern technology that allows you to transfer images, text, or graphics onto almost any fabric or material. The film is ideal for professional DTF use and Epson printers modified for DTF printing.

Product Details:

• Matte transfer film for water-based pigment inks and DTF printers

• Transfer time: approximately 10–15 seconds at 110 ℃ – 180 ℃ depending on the type of adhesive

• Suitable for printing on light and dark textiles and many other materials, including cotton, polyester, eco fabrics, etc.

• Very high wash resistance

• Available in A4, A3, A3+ sizes, as well as rolls measuring 30 cm and 60 cm x 100 m

• Compatible with all Epson printheads, including L805, L1800, R1390, L8180, L18050, L8050, XP-15000, etc.

• Supplied quantity: roll 60 cm x 100 m

Instructions:

1. Print your design: Insert the film into the DTF printer and print your design using high-quality DTF inks.

2. Apply powder: After printing, evenly apply DTF powder over the image. Shake off any excess powder.

3. Cure the design: Place the printed film into a DTF dryer to cure the powder and ink.

4. Heat pressing: Place the film onto the garment and heat press at 160 ℃ for 12 seconds.

5. Peel off: Remove the film after heat pressing.

6. Cool and finish: Let the garment cool. The design will set as it cools.

Storage: Store unused rolls in a cool, dry place, away from direct sunlight. Keep the film sealed in its original packaging or protective wrap to prevent dust and dirt.

Handling care: Do not expose the film to high humidity, extreme temperatures, or direct heat, as this may affect performance.
Avoid physical damage: Do not bend, crease, or tear the film. Store rolls horizontally to prevent pressure or deformation that could affect print quality.